cryostat (Giles)
review Dave's work in
'01-'02 (DONE)
controlling flow
through caplillary
- pursue Halperin idea for measuring flow (optional; we have 2 pumps)
- needle valve (BRING LEAK VALVE FROM NU SETUP)
- think about how to expt. with flow control (GET DOWELL THIS WEEKEND)
miscellaneous
- get spare for dewar pumpout valve - or at least find
specs (USE VAT)
- a better way to invert dewar - build ring & posts in US (AT POLE)
- buy more mylar tape (ASK DASI?)
- ensure availability of stycast (DASI HAS)
- Have stainless can welded up in case - Jeff Sundwall (NOT THIS
YEAR)
- burst disk system for flowmeter
- already built, but need cold-test (AT POLE)
- could put valve between system and burst-disk that would
be used to test for possible leakage thru non-metal seals of
burst disk
- order new couplers for SPARO - e.g. hwp shaft is most impt. (BRING
WHAT WE HAVE IN LAB)
- if SPARO for some reason is disassembled we can drill out the old ones
and install new ones
- can figure out what to order by looking at old purchase orders
- buy more KF-25 in teflon (ASK BILL; MATT CAN BRING IF NECC.)
Contact g-novak@northwestern.edu. Last updated Dec 28, 2002.