upgrading and testing
software/computers (Dave, Megan)
stateside simulation
- need...
- indexer (ALL TESTED)
- Mac quadra of S. Pole vintage (ALL TESTED)
- Bob needs to show us how to set a flag so that we
can run software even w/o a DSP card in the mac.
- Linux box like one at Pole (ALL TESTED)
- PC of S. Pole vintage running windows & lab-view (NEED NETWORK CARD)
- same versions as at Pole.
- Matt could determine which versions used
- if we are lucky we will avoid needing to buy
the I/O cards, but we can afford these if necc. (ON ORDER)
- serial cable and fix used at Pole
- details of serial communications (see ~griffin web page)
- make sure that we did actually talk over long serial line in early '02
(WE DID)
- determine how the problem was solved (shorting handshaking
lines) (DOCUMENTED)
- is serial extended needed or did we show in early '02 that
we don't need one? (WE DONT NEED ONE)
- to test indexer: send space, CR, and get # back.
- if time permits integrate camera for viewing tertiary into system
- note that Greg had it set up so JPEGs are saved with data
SPARO data system
- hardware:
- test a/d system for heat damage (LIGHT WAS COMING OUT
OF FIBER AND MATT RAN DATA SYSTEM; WE SHOULD ASK HIM IF
STRIP CHART WAS GOING)
- can be done by Bill/Jeff/Matt/Paolo
- need only Mac, plugged to fibers, chop in->chop out
- do i have records as far as what noise looks like?
- could even put in a signal with some effort
- evaluate status of Mac internal disks and backup disks - buy more (ONE
OF THE SPARES DID NOT APPEAR WHEN PLUGGED INTO ONE OF THE HEATER
MACS - COULD HAVE BEEN THE MAC NOT THE DISK THAT WAS AT FAULT. DAVE
WILL GET MORE OR WE CANNIBALIZE STUFF AT POLE AND AT NU)
- drives and silo separate.
- (5400 RPM? / 8 Gig?)
- must be SCSI
- software:
- is latest version of SPARO code on both? where in US?
SPARO data analysis
- matlab license - renew it (MEGAN)
- do inventory of all code used (Dave's and Chris' and back it up and
install stateside and test it all out)
preparing for tcl scripting
(GREG IS IN CHARGE):
- back up Chris Greer's versions of control script
- review notes made at Pole (see logbook, and software folder)
- Greer's versions were backed up, but where
- did matt write over any stuff that SPARO uses? see directory
structure in notes made at Pole
- someone who is going to Pole, or who will be working hard
stateside in Jan/Feb, should learn
tcl scripts for SPARO (GREG)
- determine if SPARO photometry scripts used in late 2001 will
still work; make changes if needed; write polarimetry scripts (GREG)
- test SPARO photometry and polarimetry scripts (GREG)
pointing model
- learn about ACBAR pointing model (DAVE)
- incorporate this into SPARO scripts (DAVE/GREG)
- develop plan for finding centroids (gaussfit?) (GREG)
web site:
- get permission to have a SPARO web site at Pole (GILES)
- develop mirroring between Pole and U.S. Web pages (GREG)
- keep both Web sites up to date as new info develops (MEGAN; GILES)
Contact g-novak@northwestern.edu. Last updated Dec 18, 2002.